| 输出信号 |
| 频率范围 |
10kHz – 1GHz |
| 调制范围 |
1Hz – 1kHz, 10% - 90% |
| 脉冲调制 |
1Hz / 1kHz, 50% duty cycle |
| 输出阻抗 |
50Ω |
| 接头 |
N female |
| 驻波比 |
< 2.5:1 |
| 功率计 |
| 前向功率（选件） |
Power meter CH1, 10kHz – 4GHz |
| 反向功率（选件） |
Power meter CH2, 10kHz – 4GHz |
| 监视电流 |
Power meter CH3, 10kHz – 4GHz |
| 测试过程 |
| 标定 |
Self calibration, calibration data saved in RT1000 |
| 监视 |
Display of the data of 3 power meters on LCD |
| 测试报告 |
Test report built automatically |
| 一般性能 |
| 接口 |
RS 232 / IEEE 488 / USB 2.0 |
| 电源 |
110V – 240VAC, 50/60Hz |
| 环境温度 |
5℃ - 40℃ |
| 选件 |
| ATT 3 / 6-100 |
3 / 6dB attenuator, 100W |
| T50-10 |
Termination, 10W |
| PM02 |
Integrated current monitor |
| CDNs |
According to IEC 61000-4-6 |
| Clamps / probes |
EM clamps / probes according to IEC 61000-4-6 |
| |
Current injection / monitoring clamps / probes
According to ISO 11451-4 / ISO 11452-4 / MIL 461 CS 114 / DO 160 |
| Field probes |
Field strength probes |
| According to IEC 61000-4-3 / ISO 11451-2 / ISO 11452-2 / MIL 461 RS 103 |
| Calibration jig |
For injection devices |
| RP1 |
Rear panel RF output |
| RP2 |
Rear panel RF monitor |
| Signal generator1 |
10kHz – 400MHz |
| Signal generator2 |
10kHz – 230MHz |
| Amplifier1 |
Integrated RF power amplifier |
| 100kHz - 230MHz, P1dB = 25W |
| Amplifier2 |
Integrated RF power amplifier |
| 100kHz - 230MHz, P1dB = 75W |
| Amplifier4 |
Integrated RF power amplifier |
| 10kHz - 400MHz, P1dB = 100W |
| Amplifier5 |
Integrated RF power amplifier |
| 10kHz – 1GHz, P1dB = 30W |
| Amplifier6 |
Integrated RF power amplifier |
| 150kHz – 1GHz, P1dB = 60W |
首页 > 产品分类 > 射频EMS测试设备 > 一体化测试系统 > RT1000 
网站地图